It has been a long time coming, but we now stock almost everything Black Label and loads of MirraCo bikes.
Arriving fresh daily…. 2012 MirraCo bikes.
Plus, we also have some 2011 MirraCo bikes in stock on sale. Get them before they are gone.
Black Label has you covered when it comes to parts.
Graduate Plastic Pedals
Polycarbonate (PC) or reinforced Nylon material
chromoly spindles
Loose ball bearings
Low profile design
Knurled central surface for grip
Molded pins
6.3 oz. / 180 grams per pedal
Black Label Grips
Black Label Repeater Grips
Black Label Vertigo Grips
Black Label Rib Logo Grips
Soft molded Kraton rubber
Medium inner flange
Open ends for bar plugs
Four Colors: Orange, Blue, Black, Green
Squishy Black Label logo surface texture
Slimfast Forks
Extra light design with tapered and butted legs
1.88 lb. / 860 grams (alloy cap included)
1-pc CNCed steer tube
Integrated lower bearing race
Tapered 28.6 to 25.4mm fork legs
Single-butted Spiral tubing: 1.3×1.0mm thick
Fully heat-treated after welding
5mm thick cutout dropouts with 10mm axle slots
Internal threads w/ low-profile alloy threaded cap
Colors: Black, Pearl White, Candy Red, Monster Green
Slimfast Handlebars
7/8” 13-butted chromoly tubing 1.0 / 1.2 / 1.5 / 1.6mm wall
8.25” tall
Heat treated after welding
3/4” (19mm) OD crossbar
1.63 lbs / 745 grams
28” / 710mm wide, 2 deg. upsweep, 11 deg. backsweep
Colors: Black, Pearl White, Candy Red, Monster Green
8-spline Three-Piece Crankset
Lightweight 4130 chromoly 28.6mm O.D. x 1.6mm wall crank arms
8-spline chromoly spindle
RHD & LHD
Sealed bearing MID BB set w/ American BB alloy cups
Weight: 2.5 lbs / 1140g in 175mm (MID BB version)
Blackpack
Each Black Label Blackpack includes:
1 Pivotal plastic seat (6.1 oz. / 175g)
1 pair Black Label plastic pedals (12.6 oz. / 360g in PC)
1 pair Black Label plastic bar ends (0.5 oz. / 15g)
Colors: Milk Jug (Trans White), Trans Red, Monster Green
6061 Sprockets
6061 T6 alloy, 1/4” thick
Light and tough
Single pin locator hole
Anodized finish with laser etched logo
Standard 15/16” (23.8mm) center hole
Two hat washers included: 22mm & 19mm ID
25t & 28t
7075 Sprockets
7075 alloy, 1/4” thick
Light and tough
Single pin locator hole
Anodized finish with laser etched logo
Standard 15/16” (23.8mm) center hole
Two hat washers included: 22mm & 19mm ID
25t & 28t
Black Label Seat Covers
Molded lightweight foam with stretch nylon cover
Screenprinted graphics
Fits raw plastic Pivotal seats
Black, White, Red
And if you can’t find what you want at our store, we stock EVERYTHING in our off site warehouse.
Have your new parts and accessories delivered right to your door.
http://www.villagecycle.com
0 Comment